<< Click to Display Table of Contents >> Navigation:  Devices > UDP data exchange > Dialog

 

The dialog of the UDP data exchange device can be opened by double-clicking on the device entry in the function block library.

 

In the dialog both sending and receiving UDP datagrams can be configured:

 

With "Server port" the UDP port number at which the server listens for datagrams and from which datagrams are sent is configured.

With "Start server" the server is started. Once the server has been startet, UDP data packages are received and interpreted and sent.

 

"Interval" is the time intervall after a transmission that must elapse before the next transmission is permitted.

For each message (message 0 or message 1) sending can be turned on and off individually.

IP adresses and ports of data receivers can be entered into the "Listeners" table. If no port is specified, port 9180 will be used by default.